Inflectra Customer Forums: Custom fields in traceability report (Thread) Hi, For the current project our QA doesnt want us to use RQ numbers for traceability but rather QA-governed requirements numbers. These are in form of PRJ-SW-XXXX, where the XXXX is manually assigned requirements number for the subproject. To accomodate this, Ive created a mandatory custom field for requirements, which shall contain these QA numbers. It is fairly easy to include QA numbers for the requirements inside of the current projects but I cant figure out how to do the same for linked requirements? Heres what I want to achieve: QA ID Brief Desc Type Status Release Traced to QA ID 001-SW-001 do something Feature Accepted 1.0 001-PRS-001 001-SW-002 Do something else Feature Accepted 1.1 001-PRS-002 001-PRS-125 To do it, I created a the following template. It works for QA ID column but not for Traced to QA ID one. What am I doing wrong? MDX ID Brief Type Status Release # Test Traceability Traced to MDX ID padding-left: px; 1"> , TC TC 1"> , [PR: ] : en-US(C) Copyright 2006-2026 Inflectra Corporation.support@inflectra.com/Computers/Software/Project_Management//Computers/Software/Quality_Assurance/KronoDesksupport@inflectra.comhttp://www.inflectra.com/kronodesk/forums/threads120/Support/Forum/spirateam/reports/2368.aspxthreadId=2368Vladimir Plotkin (vladimir.plotkin@midiagnostics.com)Custom fields in traceability report Hi, For the current project our QA doesnt want us to use RQ numbers for traceability but rather QA-governed requirements numbers. These are in form of PRJ-SW-XXXX, where the XXXX is manually assigned requirements number for the subproject. To accomodate this, Ive created a mandatory custom field for requirements, which shall contain these QA numbers. It is fairly easy to include QA numbers for the requirements inside of the current projects but I cant figure out how to do the same for linked requirements? Heres what I want to achieve: QA ID Brief Desc Type Status Release Traced to QA ID 001-SW-001 do something Feature Accepted 1.0 001-PRS-001 001-SW-002 Do something else Feature Accepted 1.1 001-PRS-002 001-PRS-125 To do it, I created a the following template. It works for QA ID column but not for Traced to QA ID one. What am I doing wrong? MDX ID Brief Type Status Release # Test Traceability Traced to MDX ID padding-left: px; 1"> , TC TC 1"> , [PR: ] : Tue, 16 Mar 2021 13:49:14 -04002021-03-22T07:57:39-04:00/Support/Forum/spirateam/reports/2368.aspxmessageId=3940David J (adam.sandman+support@inflectra.com) Hi Vladimir, Please take a look at this: https://www.inflectra.com/Support/KnowledgeBase/KB592.a Hi Vladimir, Please take a look at this: https://www.inflectra.com/Support/KnowledgeBase/KB592.aspx Regards David Sat, 20 Mar 2021 15:20:30 -04002021-03-20T15:20:30-04:00/Support/Forum/spirateam/reports/2368.aspx#reply3940messageId=3941Vladimir Plotkin (vladimir.plotkin@midiagnostics.com) Thank you very much! Ill try it this week and report back if any issues will be identified. Thank you very much! Ill try it this week and report back if any issues will be identified. Mon, 22 Mar 2021 07:57:39 -04002021-03-22T07:57:39-04:00/Support/Forum/spirateam/reports/2368.aspx#reply3941