Skip Navigation LinksHome Page > Forums > RemoteLaunch Forums > RemoteLaunch Automation E... > SpiraTeam shows wrong exe...
I'm using Spira RemoteLaunch with ReadyAPI 2.4.0.
When I run a test. I see in the log (Spirateam) that the whole test is passed. But in Spirateam it say's it failed.
I can't find a reason or a problem why it SPIRAteam says that the test is failed.
Where can I look for the problem? Or help?
I found in the following documentation:
At page 86 the following:
This screen indicates the status of the test run that was reported back from SoapUI together with any messages or other information. The execution status will be set according to the worst-case assessment reported back from SoapUI. If you have zero(0) failures, then the status will display as Passed, otherwise it will display as Failed.
And my testcase has the following:
ReadyAPI 2.4.0 TestCaseRunner Summary ----------------------------- Time Taken: 493165ms Total TestSuites: 0 Total TestCases: 87 (0 failed) Total TestSteps: 6475 Total Request Assertions: 60 Total Failed Assertions: 0 Total Exported Results: 6475 10:16:00,241 INFO [license] ReadyAPI 2.4.0 shutting down
And in SPIRA is still the status Failed.
Please help me :)
Gixed with a new: soapUIEngine.dll
And if you have any questions, please email or call us at +1 (202) 558-6885